Adds additional weight to any system

Enter the realm of cutting-edge airgun technology with the RAW Rapid Air Worx PVC Patch, a spotlight on innovation and precision marksmanship tailored for the hi-tech shooter. Arising from a relentless pursuit of perfection, this symbol signifies the fusion of advanced engineering and unrivaled performance that is RAW Rapid Air Worx.

Improves stability for benchrest, extreme long-range shooting, or speed shooting competitions.

Attaches with supplied 30mm Picatinny Scope Ring

Reduces gun movement when fired to help stay on target

Helps keep rifle vertical when mounted in a bipod

Includes a tunable harmonic vibration dampener to aid accuracy

Can be endlessly reconfigured to fit various shooting platforms and needs

Improves stability for benchrest, extreme long-range shooting, or speed shooting competitions

Fits Theoben and Rapid Air Weapon rifles that already have 400cc or 500cc bottles. Only available with MKII style inlet, not MFR versions.

Improves stability for benchrest, extreme long-range shooting, or speed shooting competitions.

Attaches with supplied 30mm Picatinny Scope Ring

Reduces gun movement when fired to help stay on target

Helps keep rifle vertical when mounted in a bipod

Includes a tunable harmonic vibration dampener to aid accuracy

Can be endlessly reconfigured to fit various shooting platforms and needs

Euro to Picatinny Rail Adaptor For Rapid Rifles For UIT Accessory Rail

Extended arca rail for RAW HM1000x chassis systems. Made in the USA by Gray Ops CNC, owned by RAW shooter Dave Preston. These arca rails are a great way to extend your bipod out further for more stability or to add other accessories to your rifle to turn it into a PRS/NRL match winning machine!

Spare magazines for RAW rifles with serial numbers beginning with the prefix "HMX". These magazines are for RAW rifles with wider magazine wells ( current production ). Magazines are wider to accommodate longer slug type projectiles.

Spare magazines for RAW rifles with serial numbers beginning with the prefix "HMX". These magazines are for RAW rifles with wider magazine wells ( current production ). Magazines are wider to accommodate longer slug type projectiles.

HMX .22 cal 12 Shot Rotary Spare Magazine, X-tra Deep, RH Feed

HMX .22 cal 12 Shot Rotary Spare Magazine,X-tra Deep, LH Feed

HMX .25 cal 12 Shot Rotary Spare Magazine, X-tra Deep, LH Feed

HMX .25 cal 12 Shot Rotary Spare Magazine, X-tra Deep, RH Feed

Double ended pellet seat made from solid Aluminum

Is not a standalone item, the extender only functions when connected to RAW Full Sized Plenum Extender or RAW Necked Down Plenum Extender.

The new Plenum Extender Extension is designed to increase the power and performance of the
HM1000X without the need to adjust the gun’s regulator. For an HM1000X in .22 caliber it can bring the power of the rifle when using slugs up to a level on par with .22LR. It does this by increasing the volume of regulated air available to the gun on each shot. This allows for more power each shot as the greater amount of air pushes the projectile faster and harder, without needing a higher regulator pressure.

·Adds 1.81” to the length the tank protrudes away from the receiver.
·Is not a standalone item, the extender only functions when connected to a Plenum Extender.
·Multiple Plenum Extender extensions can be installed at once to further augment the volume beyond the initial increase. (e.g. installing two with a 45cc plenum will add 85cc’s total.)

The new Full Sized Plenum Extender is designed to increase the power and performance of the HM1000X without the need to adjust the gun’s regulator. For an HM1000X in .22 caliber it can bring the power of the rifle when using slugs up to a level on par with .22LR. It does this by increasing the volume of regulated air available to the gun on each shot. This allows for more power each shot as the greater amount of air pushes the projectile faster and harder, without needing a higher regulator pressure.

• Adds 3.69” to the length the tank protrudes away from the receiver.
  
• The more powerful offering of the additional plenums.
  
• Can have the volume further augmented with the 20cc extension.
  
• Fits into the RAW factory chassis only.

Fits the HM1000X and HM1000 in the RAW factory chassis. Does not fit wooden LRT stock nor aftermarket stocks.(as of 6.14.24).

The new "Necked Down" Plenum Extender is designed to increase the power and performance of the HM1000X without the need to adjust the gun’s regulator. For an HM1000X in .22 caliber it can bring the power of the rifle when using slugs up to a level on par with .22LR. It does this by increasing the volume of regulated air available to the gun on each shot. This allows for more power each shot as the greater amount of air pushes the projectile faster and harder, without needing a higher regulator pressure.

This is the longer, skinnier of the two 35cc Plenums designed to accommodate the wooden LRT stock as well as the available aftermarket options.

• Adds 3.69” to the length the tank protrudes away from the receiver.
• Can have the volume further augmented with the 20cc extension
  
• Designed to fit the RAW wooden LRT stock as well as other aftermarket chassis.

Create your own slugs with the manual press from Presslug. Every shooter knows that high quality ammo is the key to success. This pellet press will give you unlimited options. Say no to compromises and create the perfect slug for your rifle. The accuracy makes it worth it.

Presslug Cut is an effective tool for cutting lead wire and making small lead cylinders which can then be turned to slugs in the Presslug pellet press. It will save you time and you don't have to cast molten lead.

The Presslug Dies are a precision-engineered reloading tool designed to shape and size lead slugs for optimal performance in airguns. Built for consistency, it ensures uniform diameter and weight, improving accuracy and ballistic efficiency.

10 lb Minimum Order.

Wire Measurements

.166 / 4.5mm / .177 / 1lb = 9.70ft

.200 / 5.5mm / .22 / 1lb = 6.75ft

.222 / 6.35mm / .25 / 1lb = 5.45ft

.280 / 7.62mm / .30 / 1lb = 3.33ft

.327 / 9mm / .357 / 1lb = 2.5ft

Adds additional dampeners to any weight system.